33
3333
33
RADAR View
With an SVGA monitor attached, RADAR
24 gives users a heads up display of the following information
(clockwise from top):
! 24 channels of metering with status and clip LED’s.
! Large, easy to read positional display.
! Sync Status Display:
o Sample rate and bit depth.
o Current time code rate and incoming TC rate.
o Sync status and reference sync source.
o Chase status and TC format.
o Sync offset.
! Transport Status Display:
o Vari-speed indicator and percentage display.
o Cycle, Auto Input, Auto Punch and Auto Play indicators.
o Pre-Roll status and current value.
o Post-Roll current value.
! Edit Status Display:
o Crossfade value.
o Last Edit display.
o Undo/Redo Level setting.
! RADARLINK/ Locator Display:
o RADARLINK ID and status.
o Start, Mark In, Mark Sync, Mark Out, Range values.
o Display (counter) format.
! Project Name.
To Next Page
Loading...