iZ Technology RADAR 24 - Renumber Project; Track Management; Naming Tracks

49
4949
49
Renumber Project
To renumber a project:
1. Use the
MENU/PREV
, arrow keys and
ENTER
key to go to the
MAIN / PROJ MENU / RENUMBER PROJECT
selection
and press the
ENTER
key.
2. Use the numeric keys, the up and down arrow keys or the Jog/Shuttle wheel to select the new project
number and press the
ENTER
key
a. If the new project number is already used for an existing project you will get a prompt similar to the
following:
b. If the new project number is unused you will get this prompt:
3. Use the
N
/
Y
keys on the keyboard or the right and left arrow keys to make your selection and press the
ENTER
key.
Track Management
Each RADAR

24 project contains 24 discrete tracks for recording audio. Each track has its own dedicated
input and output. There is no need to assign voices or assign recording directories. In fact none of the track
management chores required by digital audio workstations apply at all! RADAR

24 takes care of all the details
so you can get your work done quickly and easily.
Naming Tracks
If you wish you can name your tracks when using the RADAR View display.
To name a track:
1. Press the
NAME TRACK
key or use the
MENU/PREV
, arrow keys and
ENTER
key to go to the
MAIN / PROJ
MENU / NAME TRACK
selection and hit the
ENTER
key.
2. Use the track arming keys or the up and down arrow keys to select a track.
3. Use the right or left arrow keys to move to the name field and type in a name using the keyboard and
press the
ENTER
key.
SWAP XX WITH XX?
NO YES
RENUM XX TO XX?
NO YES