1
Specifications
• Wing span: 49 in. (1245 m.m.)
• Fuselage length: 42 in (1067 mm.)
• Total wing area: 976 sq.in. (62.67 sq.dm.)
• Take-off weight: 5.3lbs (2.4 kg.)
Items needed to complete the
Panic Aerobatic Biplane
• 5 std size servos
• 1 extension lead (500mm) for rudder servo.
• 1 receiver (minimum 4 channels)
• If using a radio without mixing, you will need a “y” lead' for the ailerons
• Engine size from 40 2-stroke up to 90 4-stroke (recommended 60-size 2-stroke)
• Glue: Cyano & Epoxy
• 2 extension leads (250mm) for aileron servos
• 1 switch harness
• 1 receiver battery (4.8-6.0 v.)
• Fuel Proofer (it is recommended that this is used inside the fuselage around the fuel tank)
Electric Power Version
(optional)
Alternatively a brushless electric motor may be used to power your Panic. Anything that will turn a
propeller of 11inches or larger at over 10+ thousand rpm will be suitable and a speed controller that
handles 60 amps or more.
Please check www.jperkinsdistribution.co.uk for a list of recommended motors, ESC & Batteries to suit
your Panic.
To Next Page
Loading...
