7. FAQ
10
NO.
Frequency
Channel 1 5.180 GHz
Channel 2 5.200 GHz
Channel 3 5.220 GHz
Channel 4 5.240 GHz
Q: Why the receiver and transmitter cannot be connected, showing "Search ipcolor Tx..." on the screen?
A: 1) Move transmitter and receiver closer.
2) Re-power the transmitter or receiver.
3) Re-pair the transmitter and receiver.
Q: Why the Wi-Fi indicator is steady on but showing "Please check the TX input signal" ?
A: 1) Make sure the TX has HDMI input and that the resolution is within the specified range.
2) Try to connect the signal source directly to the display device, or change the signal source and
HDMI cable and test again.
Q: Why is the display stuttering or unstable?
A: 1) Place the transmitter or receiver within the signal coverage and minimize obstructions between the
transmitter and receiver.
2) Switch to a different channel to avoid interference from other wireless signals.
3) Re-power the receiver or transmitter.
To Next Page
Loading...
