jablotron JA-82K OASiS User Manual

JA-82K “OASiS”
Control panel installation manual

jablotron JA-82K OASiS Specifications

General

Brand	jablotron
Model	JA-82K OASiS
Category	Control Panel
Language	English

Summary

Wiring, Power, and Reset Procedures

Power Supply and Backup Battery Connection

Connecting the main power supply, backup battery, and initial power-up steps.

OASIS Wireless Device Management

Enrolling, Testing, and Erasing Wireless Devices

Procedures for enrolling, testing signal strength, and erasing wireless devices from the control panel.

Control Panel Programming: Delays, Outputs, and System Settings

Delay Times, Alarm Duration, and PG Functions

Setting exit/entrance delays, alarm duration, and programming PG outputs.

System Arming Modes and Detector Configuration

Siren Modes, Bypass Approval, and Final-Door Detectors

Configuring siren modes, user bypass approval, and final-door detector functions.

Partial Setting and System Splitting

Configuring the system for partial arming or splitting into independent sections.

Security and System Operation Settings

Device Reactions and Section Assignment

Programming device characteristics, reactions, and section assignments.

Advanced Device and Schedule Programming

Code/Card Assignment and Production Code Enrollment

Assigning reactions and sections to codes/cards and enrolling devices by production codes.

System Operation and Access Control

Keypad Operation and Access Codes/Cards

System Arming/Disarming and Device Bypassing

Procedures for setting/unsetting the system and bypassing individual devices.

Car Protection and Maintenance Mode Functions

PC Operation, Installation, and Troubleshooting

PC System Operation and Installer Guidance

Troubleshooting Common Issues

Addressing common problems with the control panel and their solutions.

Control Panel Technical Specifications

Control Panel Programming Sequences Summary

Programming Access Codes and Cards