jablotron Profi JA-63K

Questions and Answers

S
Samantha BarrettAug 13, 2025
Why does my jablotron Profi JA-63K PIR movement detector repeatedly trigger alarms?
- S
  Shawn LambertAug 13, 2025
  The PIR movement detector might be repeatedly triggering alarms in your Jablotron Control Panel system due to several reasons. Check for animals in the protected area, sudden temperature changes, intense air circulation, or movement of objects with a temperature around 37°C. To resolve this, try increasing the detector’s immunity via its internal settings, changing the detector's location, or using an optional sensor lens.
D
Daniel AlexanderAug 16, 2025
What to do if my jablotron Profi JA-63K indicates a fault on the keypad and it is beeping?
- B
  Brandon MendezAug 16, 2025
  Check the user manual to find the reason for the trouble and fix it, or call the installer.
D
dennisperezAug 20, 2025
What to do if the Jablotron Control Panel tel. dialer calls a number multiple times when activated?
- S
  sporterAug 20, 2025
  If the telephone dialer in your Jablotron Control Panel system calls a number multiple times when activated, it might be because the telephone network isn't using standard recognition signals, so the dialer isn't sure if the connection was successful. To fix this, store F0 after the last digit of the problematic number.
A
Albert BenitezAug 25, 2025
How to fix telephone line failure indicated on jablotron Profi JA-63K Control Panel JA-65X?
- T
  Tiffany EstradaAug 25, 2025
  If your Jablotron Control Panel JA-65X indicates a telephone line failure even though the phone works normally, it could be because making a phone call longer than 15 minutes is interpreted by the system as the telephone line not being ready. If this problem persists, disable telephone line checking in programming mode.
D
David ClarkAug 28, 2025
What to do if my jablotron Profi JA-63K system does not communicate with connected PC?
- T
  Timothy ParkerAug 28, 2025
  If your Jablotron Control Panel system isn't communicating with the connected PC, the PC-60A cable might not be connected to the correct COM connector on the PC. Check the connection or manually select the port number in the software.
A
Angela RobertsSep 1, 2025
Why jablotron Profi JA-63K gives alarm after first powering?
- A
  Amy ColeSep 1, 2025
  If your Jablotron Control Panel gives an alarm after the first powering, it is possible that the control panel is not in factory default setting. Perform a factory default reset.
S
Shawn PetersonSep 4, 2025
How to solve problem with enrolling a wireless item to Jablotron Control Panel?
- A
  Angela ThompsonSep 4, 2025
  If you're having trouble enrolling a wireless item to your Jablotron Control Panel, the item's location might not be suitable, and the radio signal level could be too low due to distance or obstacles. Try changing the item's location. Temporarily secure it in the new spot first to test it.
B
blopezSep 8, 2025
Why jablotron Profi JA-63K Control Panel connected JA-60E keypad has no function?
- N
  Natalie RogersSep 8, 2025
  If the connected JA-60E keypad for your Jablotron Control Panel has no function, the connecting cable might not be properly aligned with the corresponding positions in the keypad and the control panel (1-1, 2-2, 3-3, 4-4). Check the colors of the cores in the cable and the positions on each side.