jablotron Oasis JA-80 User Manual

JA-80K “Oasis”
Control panel installation manual
This manual is valid for control panel JA-80K version KE60108 (printed on internal circuit board).
The control panel can be configured by a PC running ComLink software - version 80 or higher.

jablotron Oasis JA-80 Specifications

General

Type	Control Panel
Partitions	Up to 4
Users	Up to 50
Frequency	868 MHz
Operating Temperature	-10 °C to +40 °C
Power Supply	230 V AC
Outputs	2

Summary

Control Panel Architecture

Installation

Power Inlet

Details the connection of the control panel's power supply.

Control Panel Connectors and Terminals

Wired Keypad Connection

Back-up Battery

Powering-up the Control Panel for the First Time

Wireless Keypad Enrollment

Resetting the Control Panel

Enrolling Wireless Devices

Enrolling Wireless Devices to the Control Panel

Step-by-step instructions for enrolling devices.

Control Panel Programming

Control Panel Programming Sequences

A table detailing programming sequences for various functions.

Operating the System

The System Keypad

Programming Access Codes and Cards

Guides on how to program user access codes and cards.

Programming Access Codes and Cards

Programming Access Codes and Cards

Step-by-step instructions for programming codes and cards.

Setting and Unsetting (Arming/Disarming) the System

Maintenance Mode

Bypassing Devices

How to bypass individual devices temporarily or permanently.

Operating and Programming the System by PC

Trouble-shooting