Jabra ARROW - NEED more HELP

9
english
JABRA ARROW
I want to reset the headset
- It is possible to reset and test the headset by the following:
’Press and hold’ the answer/end button while at the same time
turning the headset ‘on’ by sliding the on/o button to the ‘on’
position. Continue to hold the answer/end button until the
light ashes 5 times. In this mode, the pairing list is reset, and
you can test if the headset works as you will be able to hear
audio in the speaker from the microphone.
- The next time you power on, the headset will go into pairing
mode as the rst time you powered your Jabra ARROW on.
Will the Jabra ARROW work with other
equipment?
- The Jabra ARROW is designed to work with
mobile
phones. It can also work with other
devices that are
compliant with
version 1.1 or higher and support
a headset and /or hands-free prole.
I cannot use Reject call, call on hold, Redial or voice dialling
- These features are dependent on the ability of your phone
to support a hands-free prole. Even if the hands-free prole
is implemented reject call, call hold and voice dialling are
optional features which are not supported by all devices. Please
consult your device manual for details.
neeD MoRe HeLP?
1. Web: www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail:
Deutsch support.de@jabra.com
English support.uk@jabra.com
Español support.es@jabra.com
Français support.fr@jabra.com
Italiano support.it@jabra.com
Nederlands support.nl@jabra.com
Polska support.pl@jabra.com
Scandinavian support.no@jabra.com
Россия support.ru@jabra.com
Information: info@jabra.com