Jabra Elite Active 75t-Navy

To Next Page

Jabra Elite Active 75t - Navy

How do I pair my Jabra earbuds with my mobile device?

To pair with your smartphone, tablet, or mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn on your earbuds by removing them from the charging case.

Alternatively, simultaneously press and hold (1 second) the Left and

Right buttons.

The LEDs on both earbuds will flash green.

3. To enter pairing mode, simultaneously press and hold (3 seconds) the

Left and Right buttons on the earbuds, until the LED on the right

earbud flashes blue.

The earbuds are now ready to pair with your mobile device.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra earbuds from the list. Alternatively, wear the earbuds to hear the

voice guided instructions.

Enter “0000” (four zeros) if you are asked for a PIN.

In daily use, when you turn on the earbuds, they will automatically

reconnect with the last previously paired device, if it is turned on and

within range.

To pair with your smartphone, tablet, or mobile device using only the

right earbud, follow these steps.

30/10/2023 23:08

https://www.jabra.ie/supportpages/jabra-elite-active-75t/100-99091000-

60/faq/8ec1bcdc-9b43-465e-b2c8-1faac22ef6f8

Page 1 of 3

Need help?

Do you have a question about the Jabra Elite Active 75t-Navy and is the answer not in the manual?

Summary

Steps to pair Jabra earbuds with a mobile device using both earbuds via Bluetooth connection.

Instructions for pairing Jabra earbuds with a mobile device using only the right earbud.

General

Type	In-ear
Connectivity	Bluetooth 5.0
Water Resistance	IP57
Microphone	4-microphone call technology
Weight (each earbud)	5.5 grams
Driver Size	6 mm
Frequency Response	20 Hz - 20 kHz
Weight (charging case)	35 grams
Colors	Navy
Battery Life	Up to 7.5 hours (earbuds), up to 28 hours (with charging case)
Noise Cancellation	Active Noise Cancellation (ANC)
Charging Time	2 hours
Wireless Charging	Yes