How do I change the voice guidance language using Jabra
Sport Life?
Jabra Elite Sport (Original)
To change the voice guidance language on your Jabra Elite Sport, follow
these steps.
1. Connect the charging case to a USB power supply and remove the
earbuds from the charging case.
2. Make sure your earbuds are paired with your smartphone.
3. Open Jabra Sport Life.
4. Tap Settings, Headphone settings, Language, and then select your
preferred language.
5. While the update is downloading, you can continue to use the earbuds.
6. When the update has downloaded, you will be notified to install the
language.
7. Follow the onscreen instructions.
8. Place the earbuds in the charging case when you are instructed to do
so, and then close the lid.
When the update is installing, the LED on the charging case will flash
purple. DO NOT open the lid until the LED has stopped flashing. It may
take up to 10 minutes.
To Next Page
Need help?
General
Weight and Dimensions
