To Next PageTo Next Page
Need help?Do you have a question about the Jabra Enhance Pro and is the answer not in the manual?
General| Rechargeable | Yes |
|---|---|
| Directional Microphones | Yes |
| Bluetooth Connectivity | Yes |
| App Compatibility | Yes (Jabra Enhance) |
| Noise Reduction | Yes |
| Battery Life | Up to 30 hours |
| Charging Case | Yes |
| App Control | Yes |
| Tinnitus Relief | Yes |
| Hearing Range | Mild to severe hearing loss |
Store hearing aids in the charging case for safety and to keep them fully charged.
Distinguish left and right aids by wire direction and color-coded dots (blue for left, red for right).
Place hearing aids in corresponding charging bays, matching colors, and rest earbuds in the center.
Your case holds 3 full charges. Plug it into an outlet to charge the case and aids simultaneously.
LEDs on aids indicate charging status; charger LEDs show battery level for hearing aids.
Aids turn on automatically when removed from charger; manual control is via a 5-second button press.
Case holds 3 charges (30 hrs each); 30 min charge provides approx. 8 hours of battery life.
Hold aid by wire, rest on ear, push earbud into canal, and ensure wire sits securely against head.
Gently pull the hearing aid from your ear by the wire; no force should be required.
Rub your finger on the back of the hearing aids to confirm the microphone is working.
Use the left button to lower volume and the right button to raise volume on your hearing aids.
Note what you hear (good and bad) to assist your specialist in adjusting sound settings.
Steps to connect your hearing aids to the Jabra Enhance Pro app on an Android device.
Steps to connect your hearing aids to the Jabra Enhance Pro app on an iPhone.
