Mounting a sport lock on the receiver
If you have acquired a sport lock for your hearing aid, follow this procedure to fasten it
on the receiver:
1. Remove the dome. See "Changing your hearing aid domes", page 33.
2. Position the receiver with the receiver wire up, and the sport lock with the tail
pointing down.
3. Thread the sport lock over the receiver nozzle on to the body of the receiver.
4. Ensure the sport lock is fully seated on the receiver.
5. The sport lock is now attached and ready.
NOTE: If you don't feel confident performing this task, please contact Jabra Enhance support. See the
back page for contact information.
43
To Next Page
Loading...
Need help?
General
