Jabra Evolve 65e UC
How do I pair my Jabra Evolve 65e with my mobile device?
To pair your Jabra Evolve 65e with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Evolve 65e by pressing and holding (3 seconds) the
Multi-function button until the LED flashes red and the neckband
vibrates.
3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue. If you are wearing the earbuds, you
will hear the pairing instructions.
Your earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Evolve 65e from the list of available devices.
Enter “0000” (four zeros) if you are asked for a PIN.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
To Next Page
Need help?
General
Weight and Dimensions
