13
ENGLISH
4.3 Power saving modes
The headset has two levels of power saving
modes: nap mode.and sleep mode.
NAP MODE
When the headset is powered on, but not being
worn, it will automatically enter nap mode to
conserve battery. To exit nap mode, simply
wear the headset.
SLEEP MODE
When the headset has been in nap mode for 8
hours it will automatically enter sleep mode to
further conserve battery. To exit sleep mode,
simply press any button.
The length of time before the headset enters
sleep mode can be adjusted using the Jabra
Sound+ app on your smartphone or Jabra
Direct on your computer.
After 24 hours of sleep mode, the headset will
power down completely. To power the headset
on, slide the On/Off switch to Off and then On.
To Next Page
Loading...
