Jabra GO 6470 Quick Start Guide

UK
tOUcHscreen cOntrOls
During normal operation, the touchscreen displays
information about your headset, shows the current
target phone and indicates its status. From here you
can answer an incoming call, end the current call,
access your base settings, choose a target phone and
open an audio link to the current target phone.
1.
2.
3.
4.
5.
6.
7.
Figure 3: Touchscreen controls for standard, everyday
operation
1 Settings icon: touch here to go to the settings
menu for your base and headset.
2 Battery indicator: indicates the current charge
level of your headset.
3 Connection status: indicates that a headset is con-
nected to the base.
4 Current target phone and status: shows the cur-
rent target phone and indicates its status (ringing,
online, etc.). This is the phone to which you will
open a connection if you tap the headset multi-
function button or touch the open-connection
icon.
5 Other phones: touch the appropriate icon here
to change the current target phone—or press the
headset multifunction button when no call is active
to cycle through available phones (press and hold
for about two seconds).
6 End call: ends the current call (if any).
7 Open connection: touch here to answer an incom-
ing call or open the audio link to the current target
phone—or tap the headset multifunction button
when no call is active.
Please see the user manual for complete details.
daily Use
Wearing the headset:
- Always wear the headset with the microphone
positioned as close to your mouth as possible.
To place or answer a call over your desk phone:
1. Touch the desk-phone icon on the touchscreen
to make the desk phone the current target. (If
necessary—the largest of the phone icons on the
screen indicates the current target.)

Jabra GO 6470 Specifications

General

Brand	Jabra
Model	GO 6470
Category	Headsets
Language	English