Jabra Pro 9460 Mono
How do I connect my Jabra Pro 9400 / Go 6400 with Aastra
6753i, 6755i, 6757i?
Requirements:
Jabra Link 14201-10
DHSG connection cable from Aastra
Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with
firmware 2.5.1.2000 or later.
To connect your headset to your phone follow these steps:
1. Plug the RJ10 connector (green) from the split end of the Aastra
DHSG cord into the headset socket.
2. Plug the RJ45 connector (yellow) from the split end of the Aastra
DHSG cord into the socket for the expansion module.
3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45
adapter.
4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the
free socket on the RJ45 adapter.
https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707-
102/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658
Page 1 of 4
To Next Page
