Jabra PRO 9450 Duo User Manual

Jabra Pro 9450 Duo
How do I manually reset my Jabra Pro 9400 Series headset?
To manually reset your Jabra Pro 9400, follow these steps.
1. Unplug the base power supply from the power outlet.
2. Remove the headset from the base.
3. Press and hold (5 seconds) the Multi-function button until the LEDs
on the boom arm rapidly blink red and turn off. Then release the
button.
Multi-function button
LED
4. Place the headset back onto the base.
5. Plug the base power supply into the power outlet again. The soft
reset is now completed.
21/12/2023 00:24
https://www.apac.jabra.com/supportpages/jabra-pro-9450/9450-29-707-
103/faq/f935d621-6fd2-4dcd-b24b-c34a9fd85fc7
Page 1 of 2

Jabra PRO 9450 Duo Specifications

General

Headset type	Binaural
Product type	Headset
Product color	Black
Wearing style	Head-band
DECT connectable	Yes
Recommended usage	Office/Call center
Wireless range	150 m
Connectivity technology	Wireless
Impedance	- Ω
Magnet type	-
Ear coupling	Supraaural
Headphone frequency	- Hz
Microphone type	Boom
Type	DECT telephone handset
Standby time	38 h
Battery recharge time	2 h
Continuous audio playback time	10 h
Base station touchscreen	No
Cables included	Phone, USB
Ear pad material	Leatherette

Weight and Dimensions

Weight	70 g

Summary

Manually Reset Jabra Pro 9400 Series Headset

Reset Procedure Steps

Detailed steps for performing a manual reset of the Jabra Pro 9400 headset, including unplugging power and holding a button.

Multi-function Button and LED Indicators

Identification and function of the multi-function button and LED lights during the reset process on the headset boom arm.

Troubleshooting Post-Reset Issues

Resolving Unresponsive Controls

Guidance on resolving headset software hangs or unresponsive multi-function buttons after a manual reset by removing the battery.