Jack A Series - Technical Parameters - P17-P32; Machine Configuration Parameters P17-P32

CONFIDENTIAL PROJECT NAME | date 项目名称 | 日期 20
Operation Instruction –technical parameter
PROJECT NAME | date 项目名称 | 日期
CONFIDENTIA
L
20
P 1 7 0~99 65
Automatic induction presser foot sensor setting (between the
maximum and minimum value
of the 02C parameter display)
P 1 8 1~120 35
Stitch balance for start back tacking No.1(Pull in compensation)
P 1 9 1~120 20
Stitch balance for start back tacking compensation
release
P 2 2 0~50 8
Needle compensate position switch interval
P 2 4 0~1024 80
Trimming point of pedal
P 2 5 1~120 35
Stitch balance for end back tacking
P 2 6 1~120 20
Stitch balance for end back tacking
P 2 7 0~2 1
presser foot induction model
（0-2）0：swicth off，1：
after trimming
presser foot lifter，2：presser foot lifter before and after trimming
P 3 0 0~31 0
Feedforward torque of
motor: 0: normal
functions 1-31:
feedforward torque level
P 3 1 10~199 50
Trimming afterburner coefficient (motor afterburner)
P 3 2 1~500 400
Thread clamp solenoid full open time (ms)