Jack C5 - Monitoring Parameters; Exit Monitoring Mode; Current Piece Count; Sensor Voltage Monitoring

12
P76
背光亮度调节参数
Backlight brightness
adjustment parameters
1 - 3 3
P77
内部限速 Internal speed limit
500-7000 6000 RPM
P78
显示模式
Display mode
0-4 0
0：正常缝纫的模式和转向
1：实时显示当前速度
2：前传感器感应电压值
3：后传感器感应电压值
4：第三传感器感应电压值
0: Normal sewing mode and turning
1: Real-time display of current speed
2: Induced Voltage Value of Front Sensor
3: Induced Voltage Value of Rear Sensor
4: Third Sensor Induced Voltage Value
P79
恢复出厂设置
Restore factory settings
0-1 0
0：无操作； 1：恢复所有出厂参数；
0：No operation; 1：Restore all factory parameters
P80
语言种类选择
Choice of Language
Categories
0-9 0
0：中文 1：英文 2：俄语 3：阿语 4：土语 5：
葡语 6：西语 7：印尼 8：越南 9：波兰语 0:
Chinese 1: English 2: Russian 3: Arabic 4: Turkish
5: Portuguese 6: Spanish 7: Indonesia 8: Vietnam 9:
Polish
P81
同步吸气，前吸屑关闭针数
Synchronized suction, front
suction closed needle number
0 - 250 0
0：前吸屑与前剪线吸气同步关闭
其他：前吸屑开启 P81 针数后关闭
0：Front suction and front trimmer synchronous
closing
Other：when after front suction opening go by P81，
thread number closing
P82
同步吸气，后吸屑关闭针数
Synchronized suction, back
suction closed needle number
0 - 250 0
0：后吸屑与后剪线吸气同步关闭
其他：后吸屑开启 P82 针数后关闭
0：Back suction and back trimmer synchronous
closing
Other：when after front suction opening go by P82，
thread number closing
P83
前剪线松线电磁阀开启针数
Stitch number of front
trimming loose line solenoid
valve on
0 - 50 1
0：前剪线松线电磁阀关闭
其他：前剪线松线电磁阀经(P83)-1 针数开启
0:Front trimming loose line solenoid valve opening
Other:Front trimming loose line solenoid valve go
by (P83)-1 open thread number
P84
前剪线松线电磁阀关闭针数
Stitch number of front
trimming loose line solenoid
valve off
1 - 50 1
P85
后剪线松线电磁阀开启针数
Stitch number of back
trimming loose line solenoid
valve on
1 - 50 12
0：后剪线松线电磁阀关闭
其他：后剪线松线电磁阀经 P85 针数开启
0:back trimming loose line solenoid valve off
Other: back trimming loose line solenoid valve
open by P85 stitch number
P86
b 剪线松线电磁阀关闭针数
Stitch number of back
trimming loose line solenoid
valve off
1 - 50 50
P87
手动吸气持续时间(*100ms)
Duration time of manual
suction
1-50 3
P88
手动吸气电机转速
Speed of manual suction motor
500 – 7000 3500
P89
- - -
C3 使用 used
P90
错误查看使能
Error viewing enable
0 - 1 0
P91
薄料感应延时滤波延时针数
Delay needle number of
0 - 100 30