Need help?Do you have a question about the Jacobsen 62238 and is the answer not in the manual?
General| Brand | Jacobsen |
|---|---|
| Model | 62238 |
| Category | Lawn Mower |
| Language | English |
Avoid moving parts, stop reel on gravel, check for damage/vibration, secure guards.
Never operate the mower with the interlock system disconnected or malfunctioning for safety.
Details on Jacobsen A984H and Honda GX-110-QX engines, including product numbers, speed, fuel, and tank capacity.
Reel type, cutter frequency, width of cut, and height of cut options for the mower.
Stop engine and disengage reels before working on mower or emptying baskets to avoid serious injury.
Keep shields in place, stop engine for adjustments, keep body parts away from moving parts, read manual.
Use clean, fresh, unleaded gasoline; do not use methanol blends.
Specific fuel mix for first 8 hours, then 50:1 mix for Jacobsen A984H engine.
Check oil/fuel, set choke, ensure clutch neutral, crank engine, warm up.
Positioning, engaging clutches, lifting head, turning, and overlapping swaths for efficient mowing.
Detailed steps for adjusting the bedknife for optimal contact with the reel blades.
How to adjust the mower's cutting height using hand wheels and gauge blocks.
Detailed steps for setting the desired cutting height using gauge blocks and adjusting nuts.
Adjusting the clutch collar for proper engagement and to prevent excessive shoe wear.
Adjusting the throttle cable for the Jacobsen A984H engine to meet RPM specifications.
Remove spark plug wire before performing maintenance to prevent accidental starting.
Keep mower clean, parts adjusted/lubricated, fluids at levels, shields secure, tires inflated.
Use lubrication chart, clean fittings, and apply grease/oil at specified intervals.
Prepare engine by adding oil to cylinder, cleaning exterior, and stabilizing fuel.
Steps to restart engine after storage, including servicing air cleaner and checking fluids.
To Next Page