Jacobsen TURFCAT-628D

WARNING: If incorrectly used this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its dangers
and should read the entire manual before attempting to set up, operate, adjust or
service the machine.
4114895 REV B
SETUP, PARTS & MAINTENANCE
MANUAL TURFCAT 600 SERIES
FOR USE WITH OPERATION & SAFETY MANUAL 4114896
Model:
946718 TURFCAT - 623D 2WD AXLE US
946719 TURFCAT - 628D 2WD AXLE US

Jacobsen TURFCAT-628D Specifications

General

Engine	Diesel
Horsepower	28 hp
Cutting Width	72 inches
Number of Blades	3
Engine Manufacturer	Kubota
Engine Model	D1105
Cutting Height Range	1 - 5 inches
Transmission Type	Hydrostatic
Engine Power	21 kW

Summary

Safety Information

Safety Warnings and Definitions

General safety notices, signal word definitions, and cautions.

Specific Torque Specifications

Torque values for critical fasteners and components.

Assembly and Setup

Tractor Assembly Steps

Instructions for assembling tractor components like steering and seat.

Cutterdeck Assembly and Setup

Steps to assemble and prepare the cutterdeck for attachment.

Maintenance Procedures

Service Schedule and Notes

Guidelines for routine service intervals and important maintenance notes.

Fluid and Lubrication Guide

Specifies fluid types, quantities, and lubrication points.

Hydraulic System Maintenance

Routine service, draining, and leak checks for the hydraulic system.

Engine Oil and Filter Service

Steps for changing engine oil, oil filter, and servicing the air cleaner.

Parts and Diagrams

Frame and Front Axle Assembly

Exploded view and parts list for the frame and front axle.

Engine Mounting Components

Exploded view and parts list for engine mounting.

Transmission and Differential Components

Exploded view and parts list for transmission and differential.

Hydraulic System Diagram

Schematic showing the hydraulic system layout.

Electrical Diagram

Schematic showing the electrical system for 623D & 628D.