Do you have a question about the Jacobsen TURFCAT-623D and is the answer not in the manual?
Number of Blades | 3 |
---|---|
Transmission Type | Hydrostatic |
Speed Range | 0-10 mph |
Turning Radius | 18 inches |
Cutting Height | 1-5 inches |
Identifies models and provides an initial safety warning for the manual.
Explains hazard signal words and lists critical torque values.
Details the steps for assembling the tractor components.
Guides the user through attaching and setting up the cutterdeck.
Covers the installation of weight transfer springs and initial lubrication.
Outlines service notes and a schedule based on operating hours.
Provides instructions for cleaning the machine and performing battery maintenance.
Details service procedures for the hydraulic system and leak detection.
Explains how to change engine oil and service the air cleaner.
Details maintenance for fuel separator, bleeding fuel, and coolant.
Illustrates the frame and front axle components and their assembly.
Shows the components and assembly of the rear axle.
Illustrates the transmission and differential assembly.
Provides a schematic of the tractor's electrical system.
Schematic of the tractor's hydraulic system operation.