3
600 Series
Turfcat
Tractors
1. STEERING WHEEL ATTACHMENT
– Attach the steering wheel to the shaft by lining up
holes R in each and inserting the roll pin.
TRACTOR ASSEMBLY
2. TRACTOR WHEEL ATTACHMENT
a) Attach the tractor wheels to the hubs.
b) Torque the front wheel bolts to 55 ft-lbs and the
rear wheel lug nuts to 80 ft-lbs.
NOTE - Check lug nut torque after the first 10 hours of
use and adjust if not still within the initial range.
All references to "right" or "left" or
"front" or "rear" are with respect to an
operator in the tractor seat.
ASSEMBLY & SETUP
To Next Page
Loading...