Jacobsen Turfcat II DW 220 User Manual

Machine operation can cause severe injury; read manual.

Covers safety for operation, terrain, loads, traffic, and attachments.

Guidelines for safe fuel handling, engine maintenance, and component safety.

Manual contains operating, maintenance, adjustment instructions and parts list.

Instructions for ordering parts, including necessary information.

Warning about the interlock system's importance for operator safety.

Details on engine model, bore, stroke, horsepower, torque, displacement, etc.

Information on transmission, steering, brakes, wheels, tires, and controls.

Physical measurements and weight data for the tractor.

List of optional attachments and accessories for the tractor.

Steps for unpacking, mounting wheels, and preparing the tractor.

Introduction to controls like ignition, throttle, hydro pedal, and parking brake.

Safety advice for operating the tractor without attachments.

Instructions for using the shift lever and glow plug switch.

Operation of throttle, ignition switch, and the hydro pedal for movement.

How to operate the attachment lift and PTO levers safely.

Explanation of the traction assist pedal's function and usage.

Information on oil pressure light, fuses, temperature gauge, and glow plug indicator.

Pre-operation checks and step-by-step guide for operating the tractor.

Situations requiring immediate engine shutdown for safety.

Steps for safely parking the tractor and operating attachments.

Safety warning regarding clearing obstructions from attachments.

Safe practices for operating on slopes and inclines.

Procedures for transporting the tractor and post-operation cleaning.

Recommended break-in process for new diesel engines.

Guidelines for optimal engine break-in for longevity.

Overview of general adjustments and access to components.

Procedures for adjusting wheel nuts and ball joints.

Adjusting the PTO linkage for proper engagement and disengagement.

How to adjust water pump and fan belt tension.

Adjusting the solenoid shut-off valve and hydro control spring.

Adjusting hydro pedal travel and parking brake free play.

Adjusting traction assist pedal and steering cables for proper function.

Adjusting reduction sprocket and interlock switches.

Adjusting PTO and shift lever interlock switches for safety.

Adjusting the seat switch for operator presence detection.

Essential maintenance tasks and safety warnings before starting.

Maintenance for assembly, paint, interlocks, belts, tires, air cleaner, and throttle.

Procedures for battery maintenance, installation, and acid handling safety.

Details on filling, charging, mounting batteries, and safety guidelines.

How to check and maintain the battery water level.

Procedures for jump-starting and maintaining the radiator.

Important guidelines for diesel fuel and cleaning the fuel filter.

Steps to bleed the fuel system after maintenance or empty tank.

Torque recommendations and installation instructions for hydraulic lines.

Basic lubrication principles and specific points for lubrication.

Lubrication details for the engine, transaxle, and hydraulic system.

Procedure for changing the hydraulic oil filter.

Guidelines for preparing and storing the vehicle for extended periods.

Steps for safely starting the tractor after it has been stored.