Jacobsen Turfcat T628D

Safety & Operation
Manual
When Performance Matters.
™
WARNING
If incorrectly used, this machine can cause severe injury. Those who use
and maintain this machine should be trained in its proper use, warned of its
dangers, and should read the entire manual before attempting to set up,
operate, adjust, or service the machine.
GB
Turfcat
®
with ROPS
946713 – Turfcat T628D, 2WD
946714 – Turfcat T628D, 4WD
2722148-Rev B

Jacobsen Turfcat T628D Specifications

General

Engine Power	24.8 hp
Transmission	Hydrostatic
Number of Blades	3
Drive	4WD
Speed Range	0-10 mph
Engine	3-cylinder diesel
Cutting Width	72 inches
Cutting Height	1 to 4 inches
Blade Tip Speed	18, 500 fpm

Summary

SAFETY

1.1 Operating Safety

Guidelines for safe operation and user responsibilities.

1.2 Important Safety Notes

Key warnings and safety alerts related to machine operation.

DECALS

INITIAL INSPECTION

4.2 Initial Inspection

Detailed checklist for pre-operation inspection of the unit.

CONTROLS

5.1 Pedal Controls

Description and operation of traction and parking brake pedals.

5.2 Control Levers

5.3 Control Panel

5.4 Operator Alerts

Information on system alerts, alarms, and warning lights.

OPERATION

6.1 Daily Inspection

Daily checks to ensure the mower is in safe operating condition.

6.2 Interlock System

Explanation and testing of the mower's safety interlock system.

6.3 Operating Procedures

Safe practices for operating the mower in various conditions.

6.4 Starting

6.5 Stopping Parking

6.7 Hillside Operation

Safety precautions for operating on slopes.

6.9 Mowing

6.11 Towing Trailering

6.12 Daily Maintenance

Routine daily maintenance tasks for the mower.

QUALITY OF CUT

7.1 Quality of Cut Troubleshooting

Diagnosing and resolving issues affecting grass cut quality.

7.2 Washboarding

7.3 Step Cutting

7.4 Scalping

7.5 Stragglers

7.6 Streaks

7.7 Windrowing

7.8 Mismatched Cutting Units

ADJUSTMENTS

8.2 Parking Brake

8.5 Traction Pedal

Adjusting the traction pedal for proper operation.