QUALITY OF CUT 7
28
7.8 MISMATCHED CUTTING UNITS ______________________________________________
NOTE: Arrow indicates direction of travel.
Mismatched cutting units is a pattern of varying cutting
heights, resulting in a stepped cut appearance, usually
due to mismatched HOC (height-of-cut) adjustment from
one cutting unit to another.
Probable Cause Remedy
HOC inconsistent from one cutting unit to another. Check/adjust HOC on cutting units to same height. (Refer to Parts &
Maintenance Manual.)
Difference in rotary cutting unit speeds. Check operation of rotary cutting motor(s) and repair/replace as
necessary.
Difference in mower ride height side to side. Check/adjust tire inflation pressure. (Refer to Parts & Maintenance
Manual.)
Check/adjust for even mower weight distribution.
To Next Page
Loading...
