Jacobsen AR3

en-62
JACOBSEN AR3
SAFETY, OPERATORS & MAINTENANCE MANUAL
11 TROUBLESHOOTING
11.2.7 Mismatched Cutting Units
NOTE: Arrow indicates direction of travel.
Mismatched cutting units is a pattern of varying
cutting heights, resulting in a stepped cut
appearance, usually due to mismatched HOC
(height-of-cut) adjustment from one cutting unit to
another.
esuaCelbaborPydemeR
ottinugnittucenomorftnetsisnocniCOH
.rehtona
refeR(.thgiehemasotstinugnittucnoCOHtsuj
da/kcehC
).launaMecnanetniaM&straPot
.sdeepstinugnittucyratorniecnereffiD
dna)s(rotomgnittucyratorfonoit
arepokcehC
.yrassecensaecalper/riaper
.edisotedisthgiehedirrewomniecnereffiD
&straPotrefeR(.erusserpnoit
alfnierittsujda/kcehC
).launaMecnanetniaM
.noitubirtsidthgiewrewomneveroftsujda/kcehC