Jacobsen AR3 Operation Manual

en-10
JACOBSEN AR3
SAFETY, OPERATORS & MAINTENANCE MANUAL
4 SPECIFICATIONS
4.4 VIBRATION LEVEL
When the machine was tested for hand/arm
vibration levels. The operator was seated in the
normal operating position with both hands on the
steering mechanism. The engine was running and
the cutting device was rotating with the machine
stationary.
The Machinery Safety Directive 98/37/EC
By compliance to:
The Lawnmower Standard EN836:1997
Referenced to hand/Arm: EN1033:1996
Information Supplied for Physical Agents
Directive 2002/44/EC
By reference to:
Hand/Arm Standards: BS EN ISO 5349-1 (2001)
BS EN ISO 5349-2 (2001)
When the machine was tested for Whole Body
vibration levels. The operator was seated in the
normal operating position with both hands on the
steering mechanism. The cutting device was
rotating with the machine driven in a straight line at
6 Km/hr on a level freshly cut lawn.
The Machinery Safety Directive 98/37/EC
By compliance to:
Whole Body EN1032:2003
Information Supplied for Physical Agents
Directive 2002/44/EC
By reference to:
Whole Body Standards BS EN ISO 2631-1 (1997)
4.5 SLOPES
DO NOT USE ON SLOPES GREATER THAN 15°
The slope 15° was calculated using static stability
measurements according to the requirements of
EN 836:1997
3RAnesbocaJ
XG&ZF,KE:seireS
noitareleccAmrA/dnaH
level
HRroHLxaM
s/msnoitareleccA
2
qeAZ,Y,XfoeulaVnaeM
96.1
3RAnesbocaJ
XG&ZF,KE:seireS
noitareleccAydoBelohW
level
tooFHRroHLxaM
s/msnoitareleccA
2
qeAZ,Y,XfoeulaVnaeM
88.0
3RAnesbocaJ
XG&ZF,KE:seireS
noitareleccAydoBelohW
level
noitacoLtaeS
s/msnoitareleccA
2
qeAZ,Y,XfoeulaVnaeM
95.0

Jacobsen AR3 Specifications

General

Brand	Jacobsen
Model	AR3
Category	Lawn Mower
Language	English