Pre-Delivery Checklist
Product No. 67978 - LF 550 2WD
Product No. 67979 - LF 550 4WD
Product No. 67980 - LF 550 Turbo 4WD
Product No. 67981 - LF 570 2WD
Product No. 67982 - LF 570 4WD
Product No. 67983 - LF 570 Turbo 4WD
Mower _________________________
Check:
❏ Wheel lug torque 85 - 95 ft. lb. (115 - 128 N.m)
❏ Tire pressure
❏ Mower 10 - 12 psi (69 - 83 kPa)
❏ Traction Pedal Calibration
❏ Traction Pedal
Engine_________________________
Check:
❏ Engine oil level
❏ Engine coolant level
❏ Air cleaner element and connections
❏ Belt adjustment
Cutting Units ___________________
Check:
❏ All hardware securely fastened
❏ Reel end play, there should be none
❏ Front roller bearing adjustment
❏ Offset in front roller brackets is away from reel
❏ Adjust reel to bedknife, .001 to .003 in. (.025-.08 mm)
❏ Adjust cutting height to customers’ requirements
❏ Make sure hoses do not interfere with lift arm.
❏ Raise/lower operation
❏ Reel motor skid plaes must have raised lip to the
front
Electrical System _______________
Check:
❏ Interlock System
❏ Ignition Switch
❏ Brake Switch
❏ Mow Switch
❏ Seat Switch
❏ LDU Operation
❏ Operation of all control switches
❏ Reel Arm Limit Switch
❏ For pinched or rubbing wires
Hydraulic System _______________
Check:
❏ Hydraulic oil level
❏ For pinched or rubbing hoses
❏ For twisted or crimped hoses
❏ For oil leaks
❏ Pump drive belt adjustment
❏ Tow Valve is closed
Miscellaneous__________________
❏ Check for loose or missing hardware
❏ All lubrication points
❏ Examine paint finish; touch up where necessary
❏ Check decals. In place and legible
❏ Make sure Parts & Maintenance Manual and Safety
& Operation Manual are in the pouch
Support___________________________________________________________
If you encounter any problems while setting up this
mower, contact the Jacobsen Customer Care
department.
Jacobsen, A Textron Company
11108 Quality Drive
Charlotte, NC 28273
800-848-1636
http://www.Jacobsen.com
Problem Description
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Dealer___ _____________________________________________ Inspected ____________________________
Customer _____________________________________________ Date _________________________________
Product No.____________________________________________ Serial No._____________________________