Jacobsen SLF530 - Display Measure Units Settings; Enter PIN for Settings

4 CONTROLS
en-23
4.2.6.13 MEASURE UNITS _______________________________________________________
Navigate to the Vehicle Settings Menu.
Use the UP and DOWN
arrow keys until the green
arrow is next to Measure Units.
Press the select button to select
Measure Units.
Use the arrow keys to change the unit
of measure. The temperature unit of
measure can be set to either °C
(Celsius) or °F (Fahrenheit).
4.2.6.14 ENTER PIN_____________________________________________________________
Start the engine. Navigate to the
Vehicle Settings Menu.
Use the UP and DOWN
arrow keys until the green
arrow is next to PIN. Press the
select button to select PIN.
Use the arrow keys to highlight the
correct number. Press the select
button to enter the number and to
advance to the next position. Repeat
until all four numbers of the pin have
been entered.
Highlight the C and press the select
button to clear the previous
number.
If the correct PIN number has been
entered the PIN menu will be on the
display.
The initial PIN number is 1001
Notice: Managers are advised to change the PIN to stop the machine parameters being changed.
Measure Units Settings
Temperature °F
Vehicle Settings Menu
Measure Units
PIN
Enter PIN
1001
123
456C
7890
Vehicle Settings Menu
Measure Units
PIN
PIN Menu
One Touch
Change PIN
Set Default Parameters
Reset Service Hours