Jacobsen SLF530 - Display Time Until Service; Display Vehicle Status

CONTROLS 4
en-26
4.2.6.17 TIME UNTIL SERVICE ____________________________________________________
Navigate to the Service Menu.
Use the UP and DOWN arrow keys until the green arrow is
next to Time Until Service. Press the select button to select Time Until
Service.
Press the back button to return to previous menu.
To reset the service hours, access the Pin Menu and select Reset Service
Hours.
4.2.6.18 VEHICLE STATUS _______________________________________________________
Start the engine. Navigate to the
Service Menu.
Use the UP and DOWN
arrow keys until the green
arrow is next to Vehicle Status.
Press the select button to select
Vehicle Status.
The first screen of the vehicle status
shows the battery voltage and the
engine coolant temperature.
The second screen of the vehicle
status shows the software revisions of
the MCU controller and display.
Press the back button to return to
previous menu.
Time until service
66 Hours
Engine Hours = 1234
Cutter Hours = 1234
Service Menu
Fault Log
Time Until Service
Vehicle Status
I/O Diagnostics
Vehicle Status
Controller Software Revision:
MAR_Controller_011990A
Display Software Revision:
MAR_Display_11792$A
Pg 1 of 2
Engine Coolant Temp
Pg 2 of 2
Battery Voltage
150.5
11.8
Volts
°F
Service Menu
Fault Log
Time Until Service
Vehicle Status
I/O Diagnostics