To Next PageTo Next PageWhat to do if Jacto DJB-20S battery does not hold charge?
If your Jacto Paint Sprayer battery isn't holding a charge, try these steps: Ensure the battery is fully charged until the charge light turns green. Use only the JACTO original charger and pump. If the issue persists, consider replacing the charger or the battery, especially if the battery life cycle is nearing its end.
Why Jacto DJB-20S Paint Sprayer charger does not work?
If the charger for your Jacto Paint Sprayer isn't working and the charge light doesn't turn on, the issue might be with the power supply. Make sure the charger is properly plugged into the electrical outlet and that the outlet is providing power. If not, try a different outlet. Also, ensure the power cord is securely connected to the charger.
What to do if Jacto DJB-20S Paint Sprayer electronic panel does not turn on?
If the electronic panel on your Jacto Paint Sprayer doesn't turn on, first, push the green button for 3 seconds to turn on the electronic panel. If that doesn't work, charge the battery for at least 15 minutes, then reinstall it and test again. Also, check the connectors between the panel and battery for rust or dirt, and clean them if necessary.
What to do if Jacto DJB-20S Paint Sprayer is spraying intermittently?
If your Jacto Paint Sprayer is spraying intermittently, it could be due to an improperly adjusted pressure switch. To resolve this, remove the sprayer base cover and use an Allen wrench no. 2 to adjust the pump pressure switch. Also, try replacing the hydraulic tip with one of the tips provided with the sprayer or a hydraulic tip with a greater flow rate.
How to fix dose/spraying variation on Jacto DJB-20S?
To fix dose or spraying variations on your Jacto Paint Sprayer, calibrate the sprayer using the Jacto Smart Control App and position the spray lance as it will be used. Additionally, remove any obstructions and clean the pump, nozzle, and nozzle filters.
What to do if Jacto DJB-20S panel turns on but the pump doesn't work?
If the electronic panel of your Jacto Paint Sprayer turns on, but the pump isn't working, start by removing the cover of the sprayer base and checking the connection between the electronic panel and the pump, as well as the connection between the electronic panel and the trigger valve. If the trigger valve cable is damaged (broken, uncovered), replace the complete trigger valve. Also, if the trigger valve orange protections are damaged and electronic components are exposed, replace the trigger valve.
What to do if Jacto DJB-20S was spraying normal, but stopped suddenly?
If your Jacto Paint Sprayer suddenly stops spraying after working normally, the issue could stem from several causes. Ensure you are using a JACTO original battery to avoid overvoltage. If the battery is completely discharged, charge it until the charge light turns green. Press the green button until the pressure drops and clean the nozzle and filters. Check the trigger valve and pump wiring.
What to do if Jacto DJB-20S panel turns on, pump turns on, but there is no spraying?
If the panel and pump of your Jacto Paint Sprayer are on, but there's no spraying, check for obstructions in the hydraulic system. Ensure the filters are clean, the tank suction hole is not clogged, and there are no folded hoses. Also, verify the correct assembly of the nozzle diffuser, ensuring the hydraulic tip diffuser pin is facing towards. You can also try positioning a hose with running water on the sprayer suction hole with the sprayer at maximum pressure and the trigger valve pushed for a few seconds.
What to do if Jacto Paint Sprayer red button does not turn off?
If the red button on your Jacto Paint Sprayer doesn't turn it off, make sure you push and hold the red button down for 3 seconds.
Why Jacto DJB-20S charger green light turns on, but the battery is not charged?
If the green light on your Jacto Paint Sprayer charger turns on, but the battery isn't charging (the light color doesn't change when the battery is connected), it could be due to poor contact in the battery connection. Make sure the plug is fully inserted into the battery connector.
General| Brand | Jacto |
|---|---|
| Model | DJB-20S |
| Category | Paint Sprayer |
| Language | English |
Maintaining a clean, well-lit workspace and keeping children away.
Precautions regarding plugs, wiring, and protection against electric shock.
Emphasizes user alertness, proper PPE, and protective clothing.
Explains the meaning of various safety symbols found on the tool and in the manual.
Proper usage, maintenance, and storage of the power tool.
Safe handling, charging, and use of battery-powered tools.
Step-by-step guide for charging JACTO batteries.
Key points for safe and effective battery charging.
How to store batteries to maximize lifespan and safety.
Procedure for safely rinsing chemical containers to remove residues.
Verifying all sprayer parts are present after unboxing.
Connecting the spray lance to the trigger valve.
Connecting the sprayer hose using the quick coupler.
Securing the electric cord to the hose for safe operation.
Adjusting shoulder straps and installing the battery.
How to choose the correct nozzle for specific spraying tasks.
Table detailing pressure, flow rate, and autonomy for various nozzles.
Explanation of the sprayer's electronic control panel features.
Information on using the mobile app for enhanced sprayer management.
Explains the dual function of the DJB unit as a Doser and Sprayer.
Steps for activating the doser, selecting doses, and time intervals.
Procedure for calibrating and measuring the precise dose applied.
Lists the range of dose volumes that can be selected on the panel.
Guidance on selecting time intervals for different plant spacings.
How to lock sprayer settings for consistent application parameters.
Instructions for activating and using the tank agitation system.
Steps to activate sprayer mode and select desired pressure levels.
Setting up the step indicator for maintaining consistent walking speed.
Detailed steps for calibrating the sprayer's application rate.
Instructions for diluting and premixing chemicals before filling the tank.
Warnings and best practices during the spraying application process.
Essential PPE required for safe sprayer operation and chemical handling.
Discusses how wind, temperature, and humidity affect spray application.
Recommendations for prolonging sprayer life through proper maintenance.
Steps for cleaning and lubricating the agitation system.
Procedures for cleaning and lubricating the quick coupler.
Lists optional accessories available for the sprayer.
Details on the anti-growth lance, including assembly and use.
How to use the calibration jug for accurate application dose measurement.
Information on the Extension 600 for enhancing spray reach.
Steps for installing the JD-40 nozzle and its filter.
Guidance on using the JD-40 nozzle for drench applications.
Safety measures to follow when returning the sprayer for service.
Details of the limited warranty provided for the sprayer.
Information on the duration and applicability of the product warranty.
Conditions under which the product warranty becomes invalid.
Items and damages not covered by the product warranty.
Overall terms and conditions governing the product warranty.
