How to fix leakage through the cylinder upper part of Jacto PJH?
Leakage through the cylinder's upper part usually occurs because the piston cup is worn or dried out. You can resolve this by replacing or lubricating the pump.
What to do if the Jacto PJH Paint Sprayer lever drops fast after pressurizing?
If the lever drops quickly after pumping and pressurizing the chamber, it's likely that the cylinder valve isn't sealing correctly due to wear or impurities. To fix this, you should clean or replace the valve.
Why does the Jacto PJH lever rise slowly after pressurizing?
If, after pumping and pressurizing the chamber, the lever rises slowly when released, it indicates that the chamber valve is not sealing properly. This is often due to wear or impurities affecting the valve. The suggested solution is to clean or replace the valve.
Guides users through identifying and correcting pressure deficiencies using a table and diagram.
Guidelines for reading labels, washing hands, mixing chemicals, and using PPE.
Details on washing application clothing separately and personal hygiene after use.
Instructions for safe chemical storage and advice in case of intoxication.
Details the warranty duration, coverage, and conditions for claims.
Outlines circumstances that nullify the warranty, including misuse and unauthorized modifications.
Lists items excluded from warranty and provides general terms regarding service and modifications.
General| Brand | Jacto |
|---|---|
| Model | PJH |
| Category | Paint Sprayer |
| Language | English |
To Next Page
