To Next PageTo Next PageHow to fix leakage through the cylinder upper part of Jacto Paint Sprayer?
Leakage through the cylinder's upper part typically happens due to a worn or dried-out piston cup. You can fix this by replacing or lubricating the piston cup.
Why is it hard to operate the Jacto X-15 Paint Sprayer lever, and the spray stops quickly?
This issue occurs due to air leaking through the nut that secures the hose to the chamber. To resolve this, first, drain all the liquid from the chamber, and then tighten the nut.
What to do if the Jacto Paint Sprayer lever drops fast after pumping?
If the lever drops quickly after pumping and pressurizing the chamber, the cylinder valve is likely not sealing correctly because of wear or impurities. You should clean or replace the valve to fix this.
Why does the Jacto X-15 lever rise slowly when released?
If the lever rises slowly after being released, the chamber valve isn't sealing properly. This is often due to wear or impurities. The solution is to clean or replace the valve.
General| Brand | Jacto |
|---|---|
| Model | X-15 |
| Category | Paint Sprayer |
| Language | English |
Defines the duration of the manufacturer's warranty.
Outlines the conditions under which the warranty is honored.
Lists situations that invalidate the product warranty.
Specifies parts and damages not covered by the warranty.
Provides overall terms and conditions for the warranty.
Identifies the specific model of the sprayer.
Specifies the unladen weight of the sprayer.
Indicates the type of pump mechanism used.
Details the material composition of the sprayer tank.
States the maximum volume the tank can hold.
Defines the highest safe operating pressure.
Specifies the length of the spray lance.
Specifies the length of the connecting hose.
Identifies the nozzle that comes standard with the sprayer.
Guide for attaching the pumping lever to the sprayer.
Secures lance holders to the rod as shown.
Connects the lance to the trigger valve with a screw cap.
Connects the hose to the trigger valve.
Tightens the fastening nut by hand before operation.
Adjusts shoulder straps for proper sprayer positioning.
Details on changing the pumping lever side.
Procedures for cleaning the sprayer after application.
Guide for lubricating pump and rod linkage.
Steps to take apart the cylinder valve.
Steps to put the cylinder valve back together.
Addresses common problems like leaks and pressure loss.
Safe and effective method for cleaning chemical containers.
Advises against eating, drinking, smoking, and polluting.
Emphasizes keeping products away from children and animals.
Instructions for showering and changing clothes after spraying.
Procedure to measure band width and calculate walking distance.
Details different nozzle types, applications, pressure, and flow rates.
