Jacuzzi hydromassage - Taps; Tubs with Separate Hot and Cold Water Taps

30
Tubs with separate hot
and cold water taps
O
pen the taps (1-2) to automatically ll the tub through the spout (3).
2
5
5a
2
3
4
5
1
1
2
4
3
■ A lever is provided to divert the water to the showerhead. The lever automatically re-
turns to the “tub lling” position when the taps are closed.
■ Before lling the tub, make sure that the lever present on the back of the spout is po-
sitioned downwards.
■ Then operate the knobs checking the temperature of the water.
~7 cm
Spout
Hot water tap (1)
Cold water tap (2)
Spout (3)
Shower head (4)
Drain control (5/5a)
N.B.: The control (5a) may be
positioned under the tub rim
It is advisable to ll the tub with
pre-mixed water (i.e. not the hot
water rst and then the cold water)
at a maximum temperature of 60° to
prevent damaging the pipes and to
reduce the formation of lime scale.
When in the tub, the water level
should completely cov-
er the highest nozzles.
Taps