Jacuzzi hydromassage - Jacuzzi Hydromassage; General Instructions for Use

35
A
ll Jacuzzi® tubs are specically designed to ensure the real, eective whirlpool experience,
which is the result of the combined action of a mixture of water (the right amount, tem-
perature and pressure) and air in the form of micro bubbles.
The hydrodynamic shape of the inside of the tub, as well as the location and orientation of the
specic nozzles, optimise this action.
This chapter introduces you to the Jacuzzi®, water wellbeing world and contains some sim-
ple instructions to set yourself up: simply press a button and step into your authentic, unique
Jacuzzi whirlpool tub.
■ The hydromassage may be more or less energetic by modifying the air-water mixture
and the intensity of the jets and their direction.
- For adjusting the air-water mixture released from the nozzles, turn the corresponding
air adjustment knobs (where included) either anticlockwise (more air) or clockwise (less
air).
- To adjust the intensity of the jets: turn either anticlockwise to increase (+), or clockwise
to decrease (-). The “stroke” of the nozzle is very small: therefore, minor adjustments will
correspond to signicant variations in ow intensity.
■ Before getting into the tub, direct the nozzles towards the part of the body you want
to massage. Simply move the nozzle to the required direction.
Fill the tub so that the upper edge
of the highest nozzles are covered
when someone is in the tub before
starting the Jacuzzi® whirlpool.
Refer to the “Taps” chapter.
The rotating jet nozzles
are not adjustable.
Before activating the hydromas-
sage, ensure that the hydromas-
sage vent nozzles are not closed.
The rotating jets are not adjustable.
Jacuzzi®
hydromassage
General instructions for use