EasyManua.ls Logo

Jacuzzi hydromassage - Page 47

Jacuzzi hydromassage
72 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
Turn the ring anticlockwise, remove and extract the nozzle from the nozzle body.
Remove residues and wash the various components with water and liquid soap.
Repeat the procedure in the reserve order.
Removing and cleaning the thermostat valve
The thermostat valve is provided with a net lter to withhold impurities in the water. The
lters could clog up in time and decrease the performance of the mixer. Refer to the “In-
stallation manual” for how to clean the valve.
It is simply sucient to dry the various components; use only mild, non abrasive liquid
soap for cleaning the tub.
Do not use scouring pads, detergent powders, acetone or other solvents.
To prevent the formation of lime scale on the taps, simply dry the various components
after use.
Use a cloth and soapy water to remove stains, rinse and dry; if you use specic products
for chrome-plated (or painted) surfaces, normally found in shops, be careful to prevent
contact with the surface of the tub.
In case of supplementary maintenance, e.g. concerning electromagnetic components
tted under the tub rim or concerning scratches and stains on acrylic parts may be carried
out specialised personnel only. In these cases, contact a Jacuzzi Authorised Service Centre
only.
Maintaining and cleaning the shower column is quick and easy: simply use mild, non
abrasive liquid detergent.
Do not use scouring pads, detergent powders, acetone or other solvents.
Use the specically marketed products for cleaning the glass.
Proceed as follows if there is lime scale deposited on the nozzles:
- turn the dial anticlockwise and force it to end of stroke; then extract it.
- clean the dial by soaking it in liquid lime scale remover (do not use metallic tools); when
retting it, make sure that it ts into the pins on the nozzle.
To prevent the formation of lime scale on the taps, simply dry the various components
after use. To remove stains, use a cloth and soapy water, rinse with clean water and dry.
Do not use abrasive pads, detergent powders, acetone or other solvents.
Micro jets
Shower area
Models with
thermostatic mixer tap
Tub and taps

Table of Contents

Related product manuals