Need help?Do you have a question about the Jacuzzi J-145 and is the answer not in the manual?
Key measures to prevent drowning, entrapment, and unauthorized child access.
Advises on preventing falls, slippery surfaces, and risks of high water temperatures.
Advises health consultations and safe handling of chemicals.
Essential guidelines for electrical safety, grounding, and bonding.
Prevention methods for hair and limb entrapment by suction fittings.
Details body, evisceration, and mechanical entrapment risks and prevention.
Explains causes, symptoms, and effects of hyperthermia from prolonged immersion.
Discusses proper grounding, bonding, and installation requirements for electrical safety.
Details requirements for spa support, drainage, and elevated installations.
Outlines considerations for indoor spa installation, including ventilation and foundation.
Reiterates general electrical safety, grounding, and bonding requirements.
Specific advice for 120/240V models, including dedicated circuits and no extension cords.
Details power requirements and wiring for North American models.
Lists power requirements for Export Models (50 Hz).
Provides detailed instructions for wiring the spa, including NEC compliance.
Specific wiring instructions for 120/240V convertible models.
Emphasizes hard-wiring for dedicated 230V-240V models.
Steps to prepare the spa before filling, including removing the filter.
Instructions on how to fill the spa, including water type caution and fill level.
Details wiring for 120V 3-wire connections, including jumper settings.
Warnings regarding water type, fill levels, and chemical handling.
Troubleshooting steps when no spa components are operating.
Solutions for water being too hot or not heating issues.
Troubleshooting steps for pump not operating or poor jet action.
To Next Page
General
