Do you have a question about the Jacuzzi J-135 and is the answer not in the manual?
Warns about risks of hair, limb, body, and mechanical entrapment in suction fittings and jets.
Discusses risks of overheating, symptoms, and effects like drowsiness and fetal damage.
General safety precautions and recommendations for using the spa.
Details electrical safety precautions including grounding, wiring, and GFCI requirements.
Factors to consider for ideal outdoor spa placement, including proximity and pathways.
Considerations for indoor spa installation, including ventilation, foundation, and drainage.
Instructions for wiring convertible 120/240V models, including warnings about extension cords.
Details the buttons and LCD display of the spa's control panel for operation.
Illustrates and labels various spa jets, air controls, and other features.
Explains how to adjust the spa's water temperature using the control panel buttons.
Instructions on how to turn on and off jets pump 1 and jets pump 2.
Details how to operate the spa's LED lighting system, including color modes.
Explains how to adjust individual jet flow and nozzle angles for personalized massage.
Describes how to use air controls to introduce air into specific jet groups.
Explains the blow-out cycle to purge air from plumbing lines after draining/filling.
Details the automatic daily cleanup cycle that runs pumps for 2 minutes.
Guides on setting up the primary filtration cycle, including start time and duration.
Explains how to select between AUTO, ECO, and DAY modes for spa heating.
Sets a reminder for when to clean or replace the spa filters.
Sets a reminder for when to drain and refill the spa water.
Instructions for setting the current time on the spa control panel.
Instructions for setting the current date on the spa control panel.
Allows switching the temperature display between Fahrenheit (°F) and Celsius (°C).
Guides on selecting the display language for the control panel.
Explains how to lock control panel settings to prevent unauthorized changes.
Step-by-step guide on how to remove and clean the spa filter cartridge.
Provides instructions on how often and how to drain and refill the spa water.
Instructions for removing, cleaning, and reinstalling spa headrest pillows.
Advice on cleaning the spa surface without damaging it, avoiding residue.
Guide on cleaning and conditioning the spa cover for longevity and appearance.
Simple instructions for cleaning the spa's synthetic cabinet.
Steps and precautions for preparing the spa for winter to prevent freeze damage.
Explains the importance of pH balance and how to maintain it for spa water.
Discusses the use of sanitizers like chlorine and bromine to destroy bacteria.
Explains the 'COOL' display, indicating temperature drop, and that no action is required.
Describes the 'ICE' display for freeze protection and the automatic pump/heater activation.
Addresses 'SN--1' error related to sensor malfunction, recommending dealer contact.
Addresses 'SN--2' error for temperature sensor malfunction, recommending dealer contact.
Indicates the need to replace the CLEARRAY UV bulb.
Shows a reminder to clean or replace the spa filter.
Indicates the water refresh timer has expired, requiring a drain and refill.
Explains 'FL--1' error related to flow switch malfunction or dirty filter.
Explains 'FL--2' error related to flow switch malfunction (closed).
Explains 'FL--3' error for erratic flow switch behavior.
Indicates 'OH' error for overheat condition, warning not to enter spa.
Explains '-- -- -- --' error for 'Watchdog' safety trigger, indicating a critical issue.
Troubleshooting steps for when the spa has no power to any components.
Troubleshooting steps when the pump doesn't run but the light does.
Steps to improve jet performance, checking jet positions and filter cleanliness.
Simple solution to reduce water temperature by adjusting the thermostat.
Troubleshooting steps for when the spa is not heating, checking thermostat and settings.
Wiring diagram for 240V 60 Hz North American J-135 and J-145 models.
Wiring diagram for 120/240V 60 Hz North American convertible models.
Wiring diagram for 240V 60 Hz convertible power models with a 4-wire connection.
Wiring diagram for 230V 50 Hz Export J-135 and J-145 spa models.
Wiring diagram for 230V 50 Hz Export J-115 and J-125 spa models.
Details dip switch settings for 2-pump and 1-pump domestic 60Hz models.
Details dip switch settings for various export 50Hz breaker configurations.
Wiring instructions for export models with a single service breaker, including jumper wiring.
Wiring instructions for export models with dual service breakers, including jumper wiring.
Wiring instructions for export models with a three-service breaker, including jumper wiring.