J-200 Series
Export J-230 Models (50Hz)
230V/20A* 230V/30A**
Circuit Breaker:
20A* 30A**
Number of Wires: 3 3
Frequency: 50Hz 50Hz
Current Draw: 15A 23A
*
In 20A configuration, the heater will not operate while either jets pump
is running in high speed. This is the factory setting. Note: pump 2 runs
only in high speed.
**
In 30A configuration, the heater will operate while one jets pump is run-
ning in high speed. Note: pump 2 runs only in high speed.
Export J-210 & J-220 Models (50Hz)
230V/20A* 230V/30A**
Circuit Breaker: 20A* 30A**
Number of Wires: 3 3
Frequency: 50Hz 50Hz
Current Draw: 15A 21A
*
In 20A configuration, the heater will not operate while the jets pump is
running in high speed. This is the factory setting
**
In 30A configuration, the heater will operate while one jets pump is run-
ning in high speed.
12