J-200
To Clean Filter:
1. Turn off power to the spa at the home’s breaker panel or select the
“HOLD” option (page 35) to disable all spa functions.
2. Lift upward on lter skimmer grill to remove it from mating retainer
clips, Figure A.
3. Unscrew and remove the lter canister cap, Figure B
4. Remove the lter cartridge by sliding it straight up from lter the
canister, Figure C.
5. Using a garden hose with a high-pressure nozzle, rinse debris from
the lter pleats beginning at the top and working your way downward,
Figure D. Continue, one section at a time, until you have rinsed all of
the lter’s pleats.
6. Reinstall lter cartridge back onto lter canister, Figure F.
7. Reinstall lter cover by sliding it down into position over mating spa
retainer clips, Figure G. Turn spa power back on after skimmer cover
is installed.
DANGER: TURN POWER TO SPA OFF! TO DECREASE
RISK OF DEATH, DROWNING, OR ENTRAPMENT,
NEVER OPERATE SPA WHEN FILTER IS NOT PROPERLY
INSTALLED OR IF SKIMMER ASSEMBLY IS DAMAGED OR
ALTERED!
(Inside Spa
View)
(Inside Spa
View)
(Filter
Canister
Cap)
(Inside Spa
View)
Figure CFigure CFigure BFigure B Figure DFigure D
Figure AFigure A
Figure EFigure E Figure FFigure F
Figure GFigure G
(Inside Spa
View)
(Inside Spa
View)
(Inside Spa
View)
41
To Next Page
Loading...
Need help?
General
