Jacuzzi J-385 Installation, Use & Maintenance Manual

38
 Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current set-
tings will remain active.
1. Press (
) until you get to the “UV” Menu. The display will
scroll “CLEARRAY BULB.”The system returns to the main menu
if no action is taken.
2. Press or to prepare the system for changes. Continually
press to adjust the length of time for the timer.
3. Once you select the number of days, press (
1
) to conrm this
selection. The system will return to the “CLEARRAY BULB” Menu.
4. Once the timer expires the display will alternate between the
water temperature and “CHANGE CLEARRAY BULB”.
Conguring reminders for changing the water
A programmable water refresh timer can be set to remind you
when to when it is time to drain and rell your spa.
• The default setting is for 180 days.
• The timer range is from 0 to 180 days, in increments of 30 days.
Note: we do not recommend deactivating this function.
 Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current set-
tings will remain active.
1. Press ( ) until you get to the “H2O” Menu. The display will
scroll “WATER REFRESH.” The system returns to the main menu
if no action is taken.
2. Press or to prepare the system for changes. Continually
press to adjust the length of time for the timer.
3. Once you select the number of days, press (
1
) to conrm this
selection. The system will return to the “WATER REFRESH” Menu.
4. Once the timer expires the display will alternate between the
water temperature and “CHANGE WATER”.
 Programming the Time
To program the time, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current set-
tings will remain active.
1. Press ( ) until you get to the “TIME” Menu. The display will
scroll “SET TIME.” The system returns to the main menu if no ac-
tion is taken.
2. Press or to display the current time.
3. Press or to prepare the system for changes.
4. Press or to adjust and program the correct hour. Press
(
1
) to save the change and move on to program the minutes.
5. The current minutes will blink as an indication that it is ready.
Press or to adjust and program the minutes. Press (
1
)
to save the change and move on to program either AM or PM.
6. The current setting will blink as an indication that it is ready.
Press
or to toggle between AM and PM. Once selected,
press (
1
) to save the change. The system will return to the “SET
TIME” Menu.
 Programming the Date
To program the date, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current set-
tings will remain active.
1. Press ( ) until you get to the “DATE” Menu. The display will
scroll “SET DATE.” The system returns to the main menu if no ac-
tion is taken.
2. Press or and the current date will scroll. For example
“JAN 01 2016.”
3. Press or to display the year.
4. Press or to adjust and program the correct year. Press (
1
) to save the change and move on to program the month.
5. The current month will blink as an indication that it is ready.
Press or to adjust and program the month. Press (
1
) to
save the change and move on to program the day.
6. The current day will blink as an indication that it is ready. Press
or to scroll through the days. When the day is selected,
press
1
to save the change. The system will return to the “SET
DATE” Menu.
 Programming the Temperature Format
To program the temperature format, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current set-
tings will remain active.
1. Press ( ) until you get to the “TEMP” Menu. The display will
scroll “TEMPERATURE FORMAT.” The system returns to the main
menu if no action is taken.
2. Press or to switch between °F or °C. Once selected press
(
1
) to save the change. The system will return to the “TEMPER-
ATURE FORMAT” Menu.
 Programming the Language
Your new spa comes with four language display options. To pro-
gram the display language, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current set-
tings will remain active.
1. Press ( ) until you get to the “LANG” Menu. The display will
scroll “LANGUAGE MENU.” The system returns to the main menu
if no action is taken.
2. Press or to display the current language.
3. Press or to scroll through the languages available. The
choices are English, French, German and Spanish. Once a selec-
tion is made, press (
1
) to save the change. The system will re-
turn to the “LANGUAGE MENU.”

Jacuzzi J-385 Specifications

General

Seating Capacity	6-7 Adults
Pumps	2
Circulation Pump	Yes
Primary Pump	2.5 HP
Secondary Pump	2.5 HP continuous duty, 4.8 HP breakdown torque
Electrical Requirements	240V