What causes water leakage from Jacuzzi Pure Air Control Panel pump unions?
If you notice water leaking from the pump unions of your Jacuzzi Control Panel, loosen the unions, then check and reseat the O-ring. If the O-ring is pinched or misshapen, it should be replaced. When tightening the union nuts, only hand-tighten them.
General| Brand | Jacuzzi |
|---|---|
| Model | Pure Air Series |
| Category | Control Panel |
| Language | English |
Explains the operation of the J2 control panel for Pure Air® systems, including blower intensity and notes.
Details the operation of the J4 control panel for Pure Air® systems, covering blower, chromatherapy, wave, and pulse features.
Details the operation of the J2 control panel for Whirlpool systems, including on/off and speed control.
Provides instructions on adjusting whirlpool jet direction and water flow using nozzle rotation.
Explains the automatic operation of the RapidHeat™ system, its limitations, and the importance of filling with warm water.
Addresses pump/motor start failures, non-functioning jets, and air injection issues, providing probable causes and remedies.
Covers water leakage from pump unions and unexpected pump/motor shutdowns due to thermal protection.
Troubleshoots non-operational chromatherapy lights and blower issues, including no air output or unexpected shutdowns.
To Next Page