16
CALL NOW 800.798.1779
SANCTUARY 1
www.infraredsauna.com
Assembly Instructions Cont’d
1. Locate the two front heaters.
2. Align the left front heater and plug the connector that comes out of the bottom of the heater into the plug
coming out of the in the floor.
3. Align the the hole in the back of the heater with the hole in the front wall glass Using the enlcosed screws and
washers, secure the heater to the glass through the pre-drilled hole. One washer will be placed on the inside
and one on the outside glass. The heater will be secured with these screws in two locations.
4. Repeat this step for the right front heater.
13 - INSTALLING FRONT HEATERS
Front
Heater
Installed
To Next Page
Loading...
