Jacuzzi SANCTUARY 1 User Manual

72
CALL NOW 800.798.1779
www.infraredsauna.com
SANCTUARY C
Assembly Instructions Cont’d
Install the benchs by sliding it over the horizontal bench guides on the back and side walls. Be careful not to
scratch the adjacent panels when sliding in the bench.
Push the bench all the way in until it touches the back panel and is securely in place.
The bench is reversible. One side is ergonomic and one side is flat. You can reverse the bench after the sauna
installation is nished. Be sure that the bench is pushed all the way back until it slides under the heater guard
to secure the bench in place.
1. Install the long left side bench rst.
2. Install the shorter right side bench second.
8 - INSTALLING BENCH
L
E
F
T
T
O
P
B
O
T
T
O
M
F
R
O
N
T
B
L
A
C
K
Optional: After the bench is installed, you can
slide in the included wood pieces to prevent
the bench from sliding left to right. One piece
can be placed on each side next to the bench.
If you decide to flip the reversible bench over,
please remove the wood pieces rst.

Jacuzzi SANCTUARY 1 Specifications

General

Brand	Jacuzzi
Model	SANCTUARY 1
Category	Plumbing Product
Language	English