Jadens printer works with any Thermal Direct Label, and compatible
with a width range from 1.57
'' to 4.1'' and length over 1.18''
Ideal for 4''*6''
4.The suitable label size
Label standard size
5.How to feed label
Pull the release latch to open the cover
Load the label and adjust the paper guide to
fit the width of paper.
The label you peel off should be facing up
(toward the ceiling)
Carefully close the cover
1 2
3
4
See FAQ at support.jadens.com
Ensure the printer is off
To Next Page
Loading...
