Jaga JRT-300 - Page 3

E - 28 januari 2019, 12:41 - Jaga N.V.
Jaga Room Thermostat JRT-300 manual: setup & user
Control panel
SET
PRG
°C
PRG
PRG MAN
ROOM
SET
User:
• 7-day programming: 5+1+1 (Monday to Friday / Saturday / Sunday)
• 4 setting (2 on/off) periods per day
Attention: after 15” of inactivity, the thermostat will return to the start-up screen, and the adjustments will be automatically confirmed.
Turn on the thermostat: short press the “ON / OFF” button
Clock adjustment:
Set the current time: press the “SET” button and hold it down for 3 seconds.
• Press “+“ or “-“ to adjust the minutes (88:88) (each press is 1 minute)
• Press “SET” to confirm. Press “+” or “-“ to adjust the hour ((88:88)) (each press is 1 hour), press “SET” to confirm
• Press “+“ or “-“ to set the current day
SET
PRG
°C
PRG
PRG MAN
ROOM
SET
, press “SET” to confirm
Temperature pre-set:
Press the “PRG” button and hold it down for 3 seconds.
Monday to friday
SET
PRG
°C
PRG
PRG MAN
ROOM
SET
:
Set the first time zone:
• Scroll with “+“ or “-“ (per 15”) to set the PRG1 time, press “PRG” to confirm. Set temperature (per 0.5°), press “PRG” to confirm.
• Scroll with “+“ or “-“ (per 15”) to set the PRG 2 time, press “PRG” to confirm. Set temperature (per 0.5°), press “PRG” to confirm.
Set the second time zone:
• Scroll with “+“ or “-“ (per 15”) to set the PRG 3 time, press “PRG” to confirm. Set temperature (per 0.5°), press “PRG” to confirm.
• Scroll with “+“ or “-“ (per 15”) to set the PRG 4 time, press “PRG” to confirm. Set temperature (per 0.5°), press “PRG” to confirm.
Repeat this for the periods
SET
PRG
°C
PRG
PRG MAN
ROOM
SET
and
SET
PRG
°C
PRG
PRG MAN
ROOM
SET
.
Short press the ON / OFF button to return to the startup screen.
Programming & week / day
Clock
Room temperature
Set temperature
 Heating
“ON / OFF” button
Program
Temperature Calibration
For experts only !! Turn off the thermostat: short press the “ON / OFF” button
Range -8°C tot +8°C.
After turning off the thermostat, press the “SET“ button and hold it down for 3 seconds. Use “+“ or “-“ to calibrate the thermostat.
Temperature pre-set EXAMPLE:
Setting: 1st time zone 2nd time zone
Program: PRG 1 PRG 2 PRG 3 PRG 4
1 2 3 4 5 Monday~Friday
6:30 8:00 18:30 22:30
21°C 18°C 21°C 16°C
6 Saterday
6:30 8:00 18:30 22:30
21°C 18°C 21°C 16°C
7 Sunday
6:30 8:00 18:30 22:30
21°C 18°C 21°C 16°C