EasyManuals Logo

Jam Out There User Manual

Jam Out There
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
EN 3
SET UP
USE
CHARGING YOUR EARPHONES
The “Out There” headphones are powered by a
rechargeable battery. The headphones come pre-
charged; however, for optimal playtime, make sure to
charge before rst use.
A – Unwrap the charging cable and plug the micro
USB end into the charging port on the headphones.
B – Connect the larger USB plug to your computer
or a powered USB AC adapter. An AC adapter is not
included in the box, but you can use the one for your
cell phone or pick one up next time you’re at the store.
C – When the LED ashes red, it indicates that the
battery is low and it’s time to plug in and recharge.
Charge for about 2 hours to get up to 17 hours of play
time; while charging, the light will stay solid red. Once
fully charged, the LED light will turn off.
*Remember to turn off the ANC feature when not
in use or when charging your headphones. This will
help ensure the most ecient charge time and longer
battery
A – TURN ON YOUR HEADPHONES
Long press the "play/pause" button for 3 seconds to
turn on your headphones.
B – CONNECTING TO A DEVICE
Once turned on, the headphones will immediately
search for a device to pair to; the LED will blink red
and blue alternately. Enable Bluetooth on your device.
From the Bluetooth menu, select "Out There." When the
device and Out There are connected, you will hear a
tone and the LED will turn solid blue.
Once paired, your device and headphones will nd
each other every time, as long as your devices
Bluetooth is on. If you’re connecting to a computer,
you may have a few more steps on that end. You’ll
have to get that information from the computer
company.
Depending on your device, you may be prompted to
enter a pairing code. If so, use “0000” as the code.
Holding down the “X” and “O” buttons at the same
time, for 5 seconds, will disconnect a paired device.
You may also connect your device to Out There using
an aux cord. When plugged in, the light will turn solid
red.
When using an auxiliary cord, you will have to play
and pause the music from your device, not your
headphones.
2hrs 17hrs
0000
...0.5s
...3s
0000
Out There
Out
There

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jam Out There and is the answer not in the manual?

Jam Out There Specifications

General IconGeneral
BrandJam
ModelOut There
CategoryHeadphone
LanguageEnglish

Related product manuals