Black Cat II Radar Recorder User’s Manual
2-4
Step #3 - Snap down the screws on the clamp bands and tighten the
clamp with a flat-head screwdriver or 5/16 inch nut driver.
Step #4 - Insert the pegs on the back of the Black Cat II Radar Record-
er's mounting bracket into the large holes of the pole mounting bracket
and slide the Black Cat II Radar Recorder down to secure it in place.
Note that it is the front of the Black Cat II Radar Recorder that you are
aiming toward the road at a 45 degree angle.
To Next Page
