Need help?Do you have a question about the JAMAR Technologies RAC Plus Series and is the answer not in the manual?
General| Brand | JAMAR Technologies |
|---|---|
| Model | RAC Plus Series |
| Category | Measuring Instruments |
| Language | English |
Explains the RAC Plus I and II DMIs using microprocessor technology for distance measurement.
Explains how MDS or mechanical sensors send pulses to the DMI for distance measurement.
Provides a step-by-step guide for setting up and using the RAC Plus I and II DMIs.
Offers precautions for installing the RAC with a Modular Distance Sensor to avoid potential problems.
Details the process of installing a Modular Distance Sensor (MDS) in vehicles manufactured after 1992.
Explains how to adjust the MDS rotary switch to match vehicle pulse rates for accurate distance measurement.
Describes mounting options and procedures for the RAC Plus instrument within the vehicle.
Guides users through the automatic calibration process to set the correct calibration number for the vehicle.
Provides troubleshooting steps for when the RAC fails to count during calibration.
Details how to manually enter a calibration number or change the vehicle number stored in the RAC.
Describes the layout and basic functions of the RAC Plus keys and display windows.
Explains how to access and use the various functions available through the RAC Plus menu system, including calibration and clock set.
Details features like Interval Distance for measuring between points of interest.
Addresses common issues with the RAC Plus, such as not counting or not turning on.
Explains power connector pinouts and the RS-232 output format for data transfer.
Lists technical specifications for the RAC Plus I including power, display, accuracy, and dimensions.
Lists additional specifications for the RAC Plus II, including memory and data output capabilities.
Provides definitions for terms and functions used throughout the RAC Plus User's Manual.
To Next Page
